高温高压电站闸阀欧洲供应商价格

进口高温高压电站闸阀

 

德国巴赫进口高温高压电站闸阀概述：Ioduction of high temperature and high pressure gate valve imported from Germany by Bach:

进口高温高压电站闸阀也称电站专项使用阀门，主要适用于火力电站各种系统的管路上，切断或接通管路介质。适用介质：水、蒸气等非腐蚀性介质。

Imported high temperature and high pressure power gate valve is also called special valve for power . It is mainly used in the pipeline of various systems of thermal power plant, cutting off or connecting pipeline medium. Applicable medium: non corrosive media such as water and steam.电站阀门与其他阀门产品相比的特点是高温高压，独特的自密封设计，压力越高，密封越可靠。由于性能技术特性、工况的特殊使产品也形成了其他产品所替代不了的特点。

 

进口高温高压电站闸阀的定义：Definition of gate valve for imported high temperature and high pressure power :

1、采用压力自紧式密封结构，弹性闸板，两端支管为焊接连。 
2、阀座密封面采用钴基硬质合金等离子喷焊而成，耐磨、抗擦伤性能好。
 阀瓣密封面经硬化氮化处理。 
3、阀杆表面经抗蚀性氮化处理，有良好的抗腐蚀和抗擦伤性。 
4、阀门的开启和关闭由电动装置来控制，电动装置分别配有专项使用电机，减速器、转矩控制机构、现场操作机构、手、电动切换机构，除就地操作外还可进行远距离操作。

Imported high temperature and high pressure power gate valve definition:

1, the pressure seal structure, flexible gate, both ends of pipe welding.  

2, seat sealing surface using cobalt based carbide plasma spray welding, wear-resistant, anti abrasion performance is good.

Valve sealing surface hardening nitriding.  

3, the surface of the valve stem by the corrosion resistance nitriding treatment, good corrosion resistance and scratch resistance.  

Open and close the valve 4, the electric device to cool electric device are respectively equipped with a special motor, reducer, torque cool mechanism, operation mechanism, manual and electric switching mechanism, in addition to local operation can also be used for remote operation.

 

进口高温高压电站闸阀技术参数：Technical parameters of imported high temperature and high pressure power gate valve:

产品名称	驱动方式	连接形式	结构形式	密封结构	压力范围	公称通径	常用材质	产品型号
进口高温高压电站闸阀	手动、电动	焊接	明杆	硬密封	10.0-32.0MPa	DN50-500	铸钢、不锈钢、铬钼钢	bach-a
阀门尺寸标准	阀门试验标准	阀门交货标准	工业阀门标准	法兰阀门标准	焊接阀门标准	对夹式连接阀	内螺纹连接阀	可以提供美国
DIN EN558-2005	DIN EN12266-1-2003	DIN3230-2-1974	DIN EN 1171-2003	DIN EN 3202-1977	DIN EN 3202-1982	DIN EN 3202-1979	DIN EN 3202-1977	API、ANSI等标准