Ultramid?PA66:
1000-11:Ultramid 1000-11 NF2001 is a general purpose PA6/6.
1000-2:Ultramid 1000-2 NF2001 is a general purpose PA6/6.
1003-11:Ultramid 1003-11 NF2002 is a general purpose, heat stabilized PA6/6.
1003-2:Ultramid 1003-2 NF2002 is a general purpose, heat stabilized PA6/6.
1310-11:Ultramid 1310-11 NF2001 is a coolled crystallization, fast cycling PA6/6 which provides extremely fast cycle times and improved productivity over Ultramid 1000.
1403-2:Ultramid 1403-2 NF3001 is a 13% glass reinforced, heat stabilized injection molding PA6/6.
1500-2:Ultramid 1500-2 NF2003 is a general purpose, 33% glass reinforced injection molding PA6/6.
1503-2:Ultramid 1503-2 NF2004 is a 33% glass reinforced, heat stabilized injection molding PA6/6.
1603-2, Ultramid 1603-2 NF2004 is a 43% glass reinforced, heat stabilized injection molding PA6/6 with the highest level of glass reinforcement for maximum strength and stiffness.
1703-2:Ultramid 1703-2 BK ND3007 is a 25% glass reinforced, heat stabilized, pigmented black injection molding PA6/6 for hydrolysis resistant applications.
7423-2:Ultramid 7423-2 NF3001 is an impact modified, 13% glass reinforced, heat stabilized injection molding PA6/6.
7523-2AM:Ultramid 7523-2AM is an impact modified, 33% glass reinforced, heat stabilized injection molding PA6/6.
N-265, Ultramid N-265 NF3001 is a general purpose, 40% mineral reinforced PA6/6 that provides excellent flatness and dimensional stability in,injection molding.
N-276, Ultramid N-276 NF3001 is a 40% mineral/glass reinforced, heat stabilized injection molding PA6/6.
N-333, Ultramid N-333 NF3001 is a 33% glass reinforced, heat stabilized, injection molding PA66 uncolored.
NBX-0025, Ultramid NBX-0025 NF2001 is a specialty, unreinforced PA6/6.
NFX-0102, Ultramid NFX-0102 NF2004 is a heat stabilized, 30% glass bead PA66 injection molding grade. It is especially formulated for low warp,increased stiffness and excellent dimensional stability.
TG3S, Ultramid TG3S is a 15% glass reinforced, heat stabilized, impact modified PA6 injection molding,compound developed for applications requiring improved toughness in combination with a balance of strength, stiffness, excellent moldability and surface aesthetics.
A25LD01, Ultramid? A25 LD 01 is a light stabilized polyamide 66 for the production of low dull fibers.
A27E01, Ultramid A27 E 01 is a low-viscosity, general-purpose PA66 grade for compounding. It conforms to FDA requirements including, 21 CFR 177.1500,EU Directive 2002/72/EC, the German BfR recommendation "X Polyamide", 1.6.1998 or legislations for other couies will be provided on request.
A27EZ01, Ultramid A27 EZ 01 is a low viscosity, general purpose PA66 grade for compounding and extrusion of monofilaments. It conforms to FDA requirements including, 21 CFR 177.1500,EU Directive 2002/72/EC, the German BfR recommendation "X Polyamide", 1.6.1998 or legislations for other couies will be provided on request.\
A3.
A3401, Ultramid A34 01 is an intermediate viscosity, PA66 grade. It conforms to FDA requirements including, 21 CFR 177.1500,EU Directive 2002/72/EC, the German BfR recommendation "X Polyamide", 1.6.1998 or legislations for other couies will be provided on request.
A3EG10, 50%Glass fibre reinforced injection moulding grade for industrial articles having very high rigidity as well as for electrical insulating parts.
A3EG3, Ultramid A3EG3 is a 15% glass fiber reinforced injection molding PA66 grade.
A3EG5, 25%Glass fibre reinforced injection moulding grade for machinery components and housings of high stiffness and dimensional stability such as coil formers and bearing cages. Also used for electrically insulating parts.
A3EG6, Ultramid A3EG6 is a 30% glass fiber reinforced injection molding PA66 grade for machinery components and housings of high stiffness and dimensional stability.
A3EG6FC, Glass fibre reinforced injection moulding grade for articles intended to come into contact with foodstuffs.
A3EG7, Ultramid A3EG7 is a 35% glass fiber reinforced injection molding PA66 grade for machinery components and housings of high stiffness and dimensional stability.
A3EG7FC, 35%Glass fibre reinforced injection moulding grade for articles intended to come into contact with foodstuffs.
A3HG2, Ultramid A 3HG2 is a 10% glass fiber reinforced injection molding PA66 grade.
A3HG5, Ultramid A3HG5 is a 25% glass fiber reinforced injection molding PA66 grade.
A3HG6HR, Ultramid A3HG6 HR BK23591 is a 30% glass reinforced, pigmented black, injection molding PA66 grade. It offers good resistance to hydrolysis.
A3HG7, Ultramid A3HG7 is a 35% glass fiber reinforced injection molding PA66 grade.
A3K, Ultramid A3K is an easy flowing, pigmented black, injection molding grade PA66.
A3KG24.
A3KN.
A3R. PE-modified dry running material for highly stressed, low noise and wear resistant, low-friction components such as bearings and sliding bars.
A3LHP, Ultramid A3L HP is an unreinforced, heat stabilized, impact modified, high flow, nylon 66 for injection molding. This grade has excellent flow and,improved ambient and low temperature toughness.
A3LHPUV,
A3SK, Very easy flowing injection moulding grade for rapid production of thin-walled technical parts (eg housings and small components)
A3W, Easy flowing, heat aging resistant injection moulding grade for fast processing. Uses include highly stressed parts such as bearings, bearing cages, gear-wheels, coil formers and cable connectors.
A3W2G10, Ultramid A3W2G10 BK20560 is a 50% glass fiber reinforced injection molding PA66 grade.
A3WG3, 15%Glass fibre reinforced and heat aging resistance injection moulding grade for machine components and housings of
medium stiffness. A3EG3 and A3HG3 are the preferred grades for producing electrically insulating parts.
A3WG5 Ultramid A3WG5 is a 25% glass fiber reinforced and heat resistance injection molding PA66 grade.
A3WG5MI.
A3WG6, Ultramid A3WG6 is a 30% glass fiber reinforced and heat resistance injection molding PA66 grade for machinery components and housings of high stiffness and dimensional stability.
A3WG7, Ultramid A3WG7 is a 35% glass fiber reinforced and heat resistance injection molding PA66 grade for machinery for industrial items.
A3WG10. 50%Glass fibre reinforced and heat aging resistance injection moulding grade for industrial articles having very high rigidity.
A3WG7HP, Ultramid A3WG7HP is a 35% glass reinforced, heat stabilized, injection molding PA66 grade with excellent flow and surface finish.
A3WGM53, Ultramid A3WGM53 is a 40% glass/mineral reinforced, pigmented black, injection molding grade for high stiffness parts with good dimensional stability and surface finish.
A3X2G10, 50%Glass fibre reinforced injection moulding grade with improved flame retardance and enhanced long-term stability. Flame retardant based on red phosphorus; very high stiffness and strength; outstanding electrical properties.
A3X2G5, Ultramid A3X2G5 is a 25% glass fiber reinforced injection molding PA66 grade with improved flame retardance and enhanced long-term performance. Flame retardant based on red phosphorus; outstanding mechanical and electrical properties.
A3X2G7, Ultramid A3X2G7 is a 35% glass fiber reinforced injection molding PA66 grade with improved flame retardance and enhanced long-term stability. Flame retardant based on red phosphorus; very high stiffness and strength; outstanding mechanical and electrical properties.
\A3X3G5, 25%Glass fibre reinforced injection moulding grade with improved flame retardance and enhanced long-term stability. Flame retardant based on red phosphorus; very high stiffness and strength; outstanding electrical properties.UL94-V0/3,2mm.
A3X4G7,
A3XZG5, Ultramid A3XZG5 is an impact-modified, 25% glass fiber reinforced injection molding PA66 grade with improved flame retardance.
A3Z, Impact-modified and stabilized injection moulding grade for components and housing with good low temperature impact resistance.
A3ZHP, Ultramid A3Z HP is an unreinforced, impact modified, heat stabilized, high flow PA66 injection molding grade. Ultramid A3ZHP offers a unique combination of maximum toughness and impact resistance with excellent high flow processability.
A3ZHPUV, Ultramid A3Z HP UV is an impact modified PA66 containing heat and ultraviolet light stabilizers.Designed for maximum toughness at low temperatures, Ultramid A3Z HP UV offers a unique combination of impact performance and excellent processability.
A3ZG6, Impact-modified, glass fiber reinforced injection moulding grade.
A3ZM4. Impact-modified, stabilized injection molding grade for components (housings) with high impact strength, heat distortion resistance and low warpage. Used for wheel covers.
A4H. High heat aging resistant, medium viscosity injection moulding grade for highly stressed parts such as bearing cages, gear-wheels, coil formers and cable connectors.
A4. Ultramid A4 is a medium viscosity, extrusion PA66 grade. It conforms to FDA requirements of 21 CFR 177.1500.
A5. Ultramid? A5. PHYSICAL. ISO Test Method. Property Value. Moisture, %. 62. RHEOLOGICAL. ISO Test Method. Property Value. MECHANICAL.
A5W.
A3WC4. Electrically conductive grade reinforced with 20% carbon fibers. Used for machinery elements and housings with high stiffness and dimensional stability, low density and favorable frictional behavior (e.g. connecting rods).
A38K.
C3M6.
C3M8. Mineral-reinforced and stabilized injection molding grade for machinery components such as crown gears and small parts with high impact strength and low warpage.
KR4205. Stabilized injection molding grade with improved flame retardance (free from halogens and phosphorus) and high toughness. Used for electrically insulating parts such as contact carriers and push-on terminal strips.
KR4281. 注塑改性级,含40%矿物质增强改性的制品
KR4650. 特殊级,适合矿物质增强改性的工程制品
免责申明:以上所展示的信息由企业自行提供,内容的真实性、准确性和合法性由发布企业负责,铝道网对此不承担任何保证责任。为保障您的利益,我们建议您选择铝道网的 铝业通会员。友情提醒:请新老用户加强对信息真实性及其发布者身份与资质的甄别,避免引起不必要
风险提示:创业有风险,投资需谨慎。打击招商诈骗,创建诚信平台。维权举报:0571-89937588。
手 机:点击查看
电 话:点击查看
传 真:点击查看
地 址:
闂傚倸鍊搁崐鎼佸磹閹间礁纾归柣鎴eГ閸ゅ嫰鏌ら崫銉︽毄濞寸姵姘ㄧ槐鎾诲磼濞嗘帒鍘$紓渚囧櫘閸ㄨ泛鐣峰┑鍡忔瀻闊洦娲樺▓楣冩⒑闂堟稓绠為柛濠冩礋瀹曟﹢鍩€椤掆偓椤啴濡堕崱妤€顫囬梺绋块瀹曨剟鎯冮鈧埞鎴︽晬閸曨偂鏉梺绋匡攻閻楁粓寮鈧獮鎺楀棘閸濆嫪澹曞┑顔结缚閸樠勬櫠娴煎瓨鐓冪憸婊堝礈濮樿埖鍤屽Δ锝呭彎閸ャ劌顕遍柡澶嬪殾閿曞倹鐓曢柡鍥ュ妼閻忕姷绱掗悩鍐测枙闁哄瞼鍠撻埀顒佺⊕宀f寧淇婇崶顒佺厱閻庯綆鍋呭畷宀勬煙缁涘湱绡€濠碘€崇埣瀹曞爼鍩¢崘銊ヨ劘闂傚倸鍊峰ù鍥р枖閺囥垹闂柨鏇炲€哥粻顖炴煥閻曞倹瀚�|闂傚倸鍊搁崐鎼佸磹閹间礁纾归柣鎴eГ閸ゅ嫰鏌ら崫銉︽毄濞寸姵姘ㄧ槐鎾诲磼濞嗘帒鍘$紓渚囧櫘閸ㄨ泛鐣峰┑鍠棃宕橀妸銉т喊闂備礁鎼崯顐︽偋婵犲洤纾瑰┑鐘崇閻撱垺淇婇娆掝劅婵″弶鎮傞弻锝嗘償椤旂厧绫嶅┑顔硷龚濞咃絿鍒掑▎鎾崇閹兼番鍨虹€氭娊姊绘担铏广€婇柡鍛洴瀹曨垶寮堕幋顓炴闂佸綊妫跨粈渚€宕橀埀顒€顪冮妶鍡樺暗闁哥姵鎹囧畷銏ゎ敂閸涱垳鐦堥梺姹囧灲濞佳勭濠婂牊鐓熼煫鍥ㄦ⒒缁犵偟鈧娲樼换鍌烇綖濠靛鍤嬮柣銏ゆ涧楠炴劙姊绘担鍛靛綊寮甸鍕┾偓鍐川椤旂虎娲搁梺璺ㄥ櫐閹凤拷|闂傚倸鍊搁崐鎼佸磹閹间礁纾瑰瀣捣閻棗霉閿濆牊顏犵紒鈧繝鍌楁斀闁绘ɑ褰冮埀顒€顕槐鎾愁潩鏉堛劌鏋戦梺纭呮彧缁犳垶顢婇梻浣筋潐婢瑰棙鏅跺Δ鍛9闁绘垼濮ら悡娆戠棯閺夊灝鑸规鐐搭殕閵囧嫰寮埀顒€螞閸愵煈娼栨繛宸簻缁犲綊鏌i幇顓炵祷濠殿喖鐖煎娲川婵犲啫闉嶉梺鑽ゅ櫐婵″洭鍩€椤掑嫭娑ч柕鍫熸倐楠炲啴鍩¢崘顏嗭紲濠碘槅鍨抽崢褍顕i幎鑺モ拻濞达綀娅g敮娑欑箾閸欏澧电€规洘鍔欏畷鐑筋敇濞戞ü澹曞┑顔结缚閸嬫挾鈧熬鎷�|闂傚倸鍊搁崐鎼佸磹閹间礁纾归柟闂寸绾惧綊鏌i幋锝呅撻柛銈呭閺屾盯顢曢敐鍡欘槬缂佺偓鍎抽…鐑藉蓟閻旂厧绠查柟閭﹀墰閸橆偊鎮楃憴鍕闁绘搫绻濆璇差吋閸偅顎囬梻浣告啞閹歌崵绮欓幘婢勶綁骞囬弶璺唺闂佺懓鐤囧▍鏇炍涢崘銊ф殾婵せ鍋撳┑鈩冩倐閺佸倿宕i妷鈺佷粣闂傚倸鍊搁崐椋庣矆娓氣偓楠炴牠顢曢敂钘夋濡炪倖鐗滈崑娑氱不閻樿櫕鍙忔俊鐐额嚙娴滈箖鎮楀▓鍨珮闁稿锕悰顔嘉熼懖鈺冿紲濠碘槅鍨崇划顖烆敂閻斿吋鈷掑ù锝堝Г绾爼鏌涢敐蹇曠暤妤犵偛绻橀弫鎾绘晸閿燂拷|闂傚倸鍊搁崐鎼佸磹閹间礁纾归柣鎴eГ閸ゅ嫰鏌涢幘鑼槮闁搞劍绻冮妵鍕冀椤愵澀鏉梺閫炲苯澧柛鐔告綑閻g兘濡歌閸嬫挸鈽夊▍顓т簼缁傚秵娼忛妸褏鐦堥梺姹囧灲濞佳冪摥闂備胶枪閿曘倝顢氶鐘愁潟闁圭偓鍓氬ḿ鈺呮煠閸濄儲鏆╅柛妯哄船椤啴濡堕崱妤€顫囬梺绋匡攻濞茬喎顕i幖浣哥睄闁割偆鍠撻崢钘夆攽閻樼粯娑ф俊顐g洴瀹曟椽鏁愭径瀣幐閻庡厜鍋撻悗锝庡墮閸╁矂鏌х紒妯煎⒌闁哄苯绉烽¨渚€鏌涢幘璺烘灈妤犵偛鍟抽ˇ宕囩磼缂佹ḿ绠炵€规洝鍩栭ˇ鐗堟償閿濆倹锛堥梻鍌氬€峰ù鍥р枖閺囥垹闂柨鏇炲€哥粻顖炴煥閻曞倹瀚�|闂傚倸鍊搁崐鎼佸磹閹间礁纾归柣鎴eГ閸ゅ嫰鏌涢锝嗙8闁逞屽厸閻掞妇鎹㈠┑瀣倞鐟滃骸危椤掑嫭鈷戦柛婵嗗閳诲鏌h箛鏂垮鐎规洦鍋婂畷鐔煎Ω閿旇姤婢戦梻浣筋嚙閸戠晫绱為崱娑樼;闁告洦鍨扮粈鍫ユ煏婵炵偓娅嗛柍閿嬪灴閺屾稑鈹戦崱妤婁患闂佸搫妫楅敃顏堝蓟濞戞埃鍋撻敐搴′簼閻忓繒鏁哥槐鎺撴綇閵娿儳鐟ㄩ柧缁樼墵閺屾盯骞囬埡浣割瀴闂佽绻愰悧鎾诲箖濡ゅ啯鍠嗛柛鏇ㄥ墰椤︺儳绱撻崒姘毙㈤柨鏇ㄤ邯婵″瓨绗熼埀顒€顕i幘顔碱潊闁斥晛鍟悵鎶芥⒒娴h鍋犻柛搴櫍瀵偊鍩¢崨顔芥闂佽法鍣﹂幏锟�|闂傚倸鍊搁崐鎼佸磹閹间礁纾归柣鎴eГ閸ゅ嫰鏌ら崫銉︽毄濞寸姵姘ㄧ槐鎾诲磼濞嗘帒鍘$紓渚囧櫘閸ㄨ泛鐣峰┑鍠棃宕橀妸銉т喊闂備礁鎼崯顐︽偋婵犲洤纾瑰┑鐘崇閻撱垺淇婇娆掝劅婵″弶鎮傞弻锝嗘償椤旂厧绫嶅┑顔硷龚濞咃絿鍒掑▎鎴炲磯闁靛ě鍌滅闂傚倷鑳舵灙妞ゆ垵妫濋幆鍕敍閻愯尙鐣鹃柣蹇曞仩婵炲洭寮崼婵嗙獩濡炪倖姊归崕鎶界嵁瀹ュ鈷戦悹鍥ㄥ絻椤掋垻绱掔€n偄绗掗柣婊嗗吹閹瑰嫰濡歌缁楀鈹戦埥鍡楃仭闁活亣顫夌粋宥呪堪閸垹褰勯梺鎼炲劘閸斿秹鍩涢幇鐗堝€堕煫鍥ュ劦濡绢噣鏌熸笟鍨缂佺粯绻堝畷姗€鍩炴径姝屾濠德板€楁慨鐑藉磻閻愬搫绠查柛銉墰瀹撲線鏌熼悜姗嗘當缂佺姴顭烽弻娑㈠Ω閿旈敮濮囬梺鍝勬媼閸撶喎顫忔繝姘<婵炲棙鍩堝Σ顕€姊虹涵鍛撶紒顔肩Ч瀹曟碍绻濋崶褏顔掑銈嗘閸嬫劙顢欓崱娑欌拺閻犳亽鍔屽▍鎰版煙閸戙倖瀚�|闂傚倸鍊搁崐鎼佸磹閹间礁纾圭€瑰嫭鍣磋ぐ鎺戠倞闁靛ě鍛獎闂備礁澹婇崑鍡涘窗閸℃ḿ顩烽柛顐犲灮绾惧ジ鎮楅敐搴′航闁稿簺鍎茬换娑㈠礂閼测晛鈪归梺瀹狀潐閸ㄥ潡骞冮埡浣烘殾闁搞儴鍩栧▓褰掓⒒娴h櫣甯涢悽顖ょ磿缁寮介鐐舵憰闂佺粯妫佸▍锝囧婵傚憡鐓忛煫鍥ㄦ礀鏍¢梺璇茬箰閻楀繒妲愰幘瀛樺闁告繂瀚烽埀顒佹尵缁辨挸顓奸崟顓犵崲閻庢鍠栭…鐑藉箖閵忋垺鍋橀柍銉ュ帠婢规洖鈹戦悙鏉戠仸闁荤噦绱曠槐鎾愁潩閼哥數鍘藉銈嗘尵閸庢劙宕曢幋鐘电<閺夊牄鍔屽ù顔姐亜閵忊€冲摵鐎规洖宕灒濞撴凹鍨槐锟�|English
闂傚倸鍊搁崐鎼佸磹閹间礁纾归柟闂寸绾惧綊鏌i幋锝呅撻柛銈呭閺屾盯顢曢敐鍡欘槬缂佺偓鍎抽…鐑藉蓟閻旂厧绠查柟閭﹀墰閸橆偊鎮楃憴鍕闁绘搫绻濆璇测槈閵忊晜鏅濋梺闈涚墕閹冲繘鎮樻担鍓叉富闁靛牆鍊瑰▍鍡涙煟閹垮嫮绡€鐎殿喛顕ч埥澶愬閻樻鍟嬫繝寰锋澘鈧劙宕戦幘缁樼厵闁惧浚鍋勬慨宥夋煛娴e摜效闁诡喗鐟╅幃婊兾熼柨瀣伖闂備浇宕垫慨鍨娴犲绀夐悘鐐缎掗弸宥夋煙閹殿喖顣奸柣鎾寸懇閺屾盯骞嬪▎蹇婂亾閺嶎偀鍋撳鐐 闂傚倸鍊搁崐鎼佸磹閹间礁纾归柣鎴eГ閸ゅ嫰鏌涢幘鑼槮闁搞劍绻冮妵鍕冀椤愵澀鏉梺閫炲苯澧柛鐔告綑閻g兘濡歌閸嬫挸鈽夊▍顓т簼缁傚秵娼忛妸褏鐦堥梺姹囧灲濞佳冪摥闂備胶枪閿曘倝顢氶鐘愁潟闁圭偓鍓氬ḿ鈺呮煠閸濄儲鏆╅柛妯哄船椤啴濡堕崱妤€顫庢繝娈垮枟閹稿啿鐣峰┑鍡╂僵閺夊牃鏅濋敍婊堟⒑缂佹﹫渚涢柛鐘崇墵瀹曟繈鏁冮崒娑氬幐闁诲繒鍋熼弲顐㈡毄婵$偑浼囬崒婊呯崲闂佸搫鏈惄顖炵嵁濡吋宕夐柣鎴炨缚閳ь剝顕ч—鍐Χ閸℃ḿ鈹涚紓鍌氱С缁舵岸鐛崘鈺冾浄閻庯綆浜滅粣娑欑節閻㈤潧孝闁哥噥鍨堕、鏃堟偄閸忓皷鎷绘繛杈剧秬婵倗娑甸崼鏇熺厱闁挎繂绻掗悾鍨殽閻愯尙绠婚柡浣规崌閺佹捇鏁撻敓锟� © 2002-2024 闂傚倸鍊搁崐鎼佸磹閹间礁纾瑰瀣捣閻棗銆掑锝呬壕濡ょ姷鍋為悧鐘汇€侀弴銏℃櫆闁芥ê顦純鏇熺節閻㈤潧孝闁挎洏鍊濋幃褔宕卞▎鎴犵劶闂佸壊鍋嗛崰鎾剁不妤e啯鐓欓悗娑欋缚閹冲啴鏌h箛锝勯偗闁哄本绋撻埀顒婄秵閸撴瑩寮搁幋锔界厪闁搞儜鍐句純閻庢鍠曠划娆愪繆濮濆矈妲鹃梺缁樻尭閸婅崵妲愰幒鎾卞亝闁告劦浜為弳顐ょ磽娴e搫校闁绘濮撮锝嗙節濮橆厼浜滈柣鐐寸▓閳ь剙鍘栨竟鏇㈡⒑濮瑰洤鐏繛鍛劦閹兘鎮ч崼鐔烘闂傚倸鍊搁崐鐑芥嚄閸洏鈧焦绻濋崶椋庣◤婵犮垼娉涢埊鏇灻洪鍛簻闂佺粯鎸稿ù鐑芥偩閸濆嫧鏀介幒鎶藉磹閺囥垹绠犻幖娣妼缁犳煡鏌ら崫銉ヤ化濞存粍绮撻弻鐔煎箲閹邦厾銆愭繛瀵稿У鐢偟妲愰幒妤婃晩闁兼祴鏅涢悡鐔封攽椤旂》榫氭繛鍜冪秮楠炲繘鎮╃拠鑼紜闂佹儳娴氶崑鍡樼閼哥數绡€闁汇垽娼ф禒鈺呮倶韫囨梻鎳囩€规洑鍗冲鍊燁檨闁搞倖娲橀妵鍕箛閳轰胶鍔撮梺鍛婅壘椤戝懘鈥︾捄銊﹀磯濞撴凹鍨伴崜鍗炩攽閻愬弶鍣烽柛銊ㄦ椤繘鎼圭憴鍕/闂侀潧枪閸庢煡鎮甸姀銈嗏拺闁荤喐婢樺▓鈺呮煙閸戙倖瀚�闂傚倸鍊搁崐鎼佸磹閹间礁纾归柟闂寸绾惧綊鏌i幋锝呅撻柛銈呭閺屾盯顢曢敐鍡欘槬缂佺偓鍎抽…鐑藉蓟閻旂厧绠查柟閭﹀墰閸橆偊鎮楃憴鍕闁绘搫绻濆璇测槈閵忊晜鏅濋梺闈涚墕閹冲繘鎮樻担鍓叉富闁靛牆鍊瑰▍鍡涙煟閹垮嫮绡€鐎殿喛顕ч埥澶愬閻樻鍟嬫繝寰锋澘鈧劙宕戦幘缁樼厵闁惧浚鍋勬慨宥夋煛娴e摜效闁诡喗鐟╅幃婊兾熼柨瀣伖闂備浇宕垫慨鍨娴犲绀夐悘鐐缎掗弸宥夋煙閹殿喖顣奸柣鎾寸懇閺屾盯骞嬪▎蹇婂亾閺嶎偀鍋撳鐐濠电姷鏁告慨鐑藉极閸涘﹥鍙忛柣鎴f閺嬩線鏌熼梻瀵割槮缁惧墽绮换娑㈠箣濞嗗繒浠鹃梺绋款儍閸婃繈寮婚弴鐔虹闁绘劦鍓氬鎺楁⒑闁偛鑻晶鍓х磼閻樿櫕宕岀€殿噮鍋婇獮妯肩磼濡粯顏熼梻浣芥硶閸o箓骞忛敓锟�2-20060159