中频逆变直流点焊机，镍网镍片点焊机，

TMF系列中频逆变直流点(凸)焊机

TMF Series Medium Frequency Inverter DC Spot welding Machine

特点和用途：

1 、 通电时间短、热效率高、可有效舒缓焊接飞溅、获得稳定高品质的焊接效果，焊接成型美观。

2、 控制精度高，中频点焊机由于工作频率高（通常在1-4KHz），使得反馈控制精度是一般交流点凸 焊机和次级整流点凸焊机的20-80倍，相应的输出控制精度也非常高。

3、逆变点焊机采用三相输入，宜于电网供电平衡，无须电力补偿设备，对电网无干扰。

4、节能：逆变焊机由于热效率高、焊接变压器小、铁损小，焊接同样的工件时，比交流点焊机和次级整流点焊机节能可达30%以上。

5、适用性广：可以焊接铜、铝和镀锌金属等材料，焊接效果良好。尤其适合于三层板焊接、非常薄的材料的焊接以及准确焊接的要求。

Main Features:

1.Current time is short, high thermal efficiency, which can effectively inhibit welding spatter, stability of high quality welding effect, beautiful welding forming

2.Cool precision is high, intermediate frequency spot welding machine due to the high wong frequency (usually in 1-4 KHZ), the feedback cool precision is general ac point convex welder and secondary rectifier point convex welder 20-80 times, the corresponding output is also very high cool precision.

3．Inverter spot welding machine adopts three-phase input, like the balance of power supply, no power compensation equipment, no interference of power grids

4.Energy saving: due to the high thermal efficiency, small welding transformer, welding inverter and small iron loss, welding the same artifacts, than ac spot welding machine and secondary rectifying spot welding machine and energy saving can reach more than 30%

5.Wide applicability: can welding materials such as copper, aluminum, and galvanized metal, welding effect is good.Three layer board is especially suitable for welding, welding material is very thin, and the requirements of precision welding

 主要技术参数 Main Technical Parameter 

参数/型号 Parameter/model	TMF-50KVA	TMF-90KVA	TMF-150KVA	TMF-170KVA	TMF-250KVA	TMF-300KVA
额定电源 Rated/Voltage	3相，交流电（AC），380------415-----480V，50/60HZ
额定容量 Rated/Capacity	50KVA	90KVA	150KVA	170KVA	250KVA	300KVA
额定占截率 Rated Duty Cycle	50%	50%	50%	50%	50%	50%
非常大焊接电流 Max Welding Current	18500A	23500A	32000A	40500A	56500A	80000A
电较行程 Electrode Stroket	75MM			100MM
电较臂间距 Welding Arm Spacing	260MM			320MM
气源压力 Air Source Pressure	0.6MPa