常温化学抛光剂

JB-B04常温化学抛光剂

u  产品特性

1.含适合的整平剂、缓蚀剂、光亮剂等，处理后表面光亮、平整、洁净。有利于着色型材底色稳定、色泽鲜艳。

2.对砂面处理的型材有特别增光漂白效果。

3.工艺简单、操作方便、槽液易于维护，铝材损耗、槽液沉淀少，无气味散发，符合环保要求。

u  开槽参数

JB－B04 : 30~50g / L

u  控制参数

总酸   ：30-40g/L

时间 ：1～8min                                        

u  维护和管理                          

   1.每天分析一次总酸度，依分析结果及时调整；每补加1kg JB－B04总酸度可升高0.8～1.0点；处理100m2消耗JB－B04：0.6～0.8Kg。

     2.每天清理槽液表面不溶污物，避免起料时污物附着产品表面造成清洗困难。

     3.长期使用后,当槽液中铝离子积累过高时（30g/l）,应部分或全部更换槽液。

u  包装、贮存及保质期

25kg塑料桶装；避光、避碱、轻放、密封置干燥，阴凉处，防止泄漏。室温存放1年。

 

 

JB-B04  Normal temperature chemical polishing Additive

u  Product Features

1.It contains leveling agent, corrosion inhibitor and brightener. Work piece will be bright, clean and smooth after treatment with this additive.

2.Effective specially for sand blasting surface, easy to use.

3.Simple maintenance of bath, less aluminum loss thus less precipitation, no odor and environmentally friendly.

u  Tank set up parameters

JB－B04 : 30~50g / L

u  Coolling parameters

Total Acid ：30-40g/L

time ：1～8min                                        

u  Maintenance and cool

  1.Analyse the total acidity once a day. Every 1kg of JB-B04 added will increase acidity by 0.8 to 1.0g/l. Consumption rate is 0.6 to 0.8kg of additive for every 100m2 of surface treated.

   2. Regular cleaning of unresolved substances floating on bath surface to prevent contaimination of work piece.

   3.When aluminum ions increased to >30g/l after long time production, part or all bath solution should be changed.

 

u  Packing and Storage

25kg plastic bucket；Protect form heating, avoid alkali, keep sealed in a dry, cool place and  prevent   leakage. The product shelve life is 1 year under room temperature